QF2000 (Single Bolt Mounting Type)

  • One Piece Type (≦φ160)

Features

  1. Simply turning a clamp bolt fixed to the adapter a few times enables cutter exchange.
  2. The cutter needs to be turned 90° before removal. This prevents the cutter from falling free.
  3. Applicable to both face milling and boring tools.
  4. Cutter exchange time is less than 1 min.
  • Two Piece Type (≧φ200)

Features

  1. Internal diameter of the cutter body has 4─6 mounting teeth. The adapter has the same mounting teeth and a single clamp bolt for installation.
  2. The cutter needs to be turned 15° before removal. This prevents the cutter from falling free.
  3. Cutter exchange time is less than 1 min.

QF1000 (Gourd Shaped Hole Type)

  • One Piece Type (O Type φ200)
  • Two Piece Type (T Type ≧φ250)

Features

  1. Gourd shaped hole type is employed. Turning 4─6 bolts enables cutter exchange.
  2. The cutter needs to be turned 15° before removal. This prevents the cutter from falling free.
  3. Cutters with ≧φ250 are made up of 2 parts. Thus, weight at the time of installation is reduced and safety is improved.
  4. Standard adapters facilitate installation of cutters with the same diameter and different insert shapes.
  5. Cutter exchange time is less than 3─5 min.