DC(mm) : Drill Diameter
vc(m/min) : Cutting Speed
fr(mm/rev) : Feed per Revolution
η : Machine Coefficient
Pc(kW) : Actual Cutting Power
 

Work Material
DC(mm)
vc(m/min)
fr(mm/rev)
η
Pc(kW)

Example

How much the Actual Cutting Power is required when cutting SCM440 by MVX3000X2F32? With Cutting Speed is 140m/min, Feed per Revolution is  0.15mm/rev, and Machine Coefficient is 80%.

Answer

Select SCM440 from Work Material. Input 30 in DC, 140 in vc, 0.15 in fr, and 0.8 in η.
Then press <Calculate> and Pc=6.5 (kW) is obtained.

Disclaimer

Mitsubishi Materials Corporation ("the company") takes great care over the information presented on this webpage, but it does not guarantee its accuracy or appropriateness.
The company does not guarantee the overall consistency of the information and URLs that appear here and reserves the right to modify the contents as needed.
The company accepts no liability for any loss or damage incurred through accessing this webpage or using information obtained from it, regardless of the reason.