Tools for Gang Type Automatic Lathes (For External Turning and Boring)

PVD Coated Cemented Carbide Grade for Carbon Steel MS6015

Skilled at pure iron, carbon steel and free cutting steel turning and achieving implemented stable finished surfaces and excellent dimensional0 accuracy.

Molded Breaker Insert

Nose radii designed with minus tolerance

  • Suitable for small parts applications that often require minus tolerance dimensions. The order number is shown with the letter “M”.
  • The order number is shown with the letter “M” that indicates minus tolerance. ex) DCGT32.50.2M= FS.
  • The radius value is printed on the side of the insert label for easy recognition.
Molded Breaker Insert

Tolerance Corner R

Tolerance Corner R

Cutting Off

Cutting Off

Back Turning

Back Turning

Threading

Threading

Back Clamping Mechanism

Back Clamping Mechanism

Screw designed for front and back clamping.

Grooving

  • 3-cornered
  • Groove width .012─.118inch (0.3 ─3.0 mm)
  • Traversing possible
Grooving

Front Turning

  • ISO E class accuracy inserts
  • A wide variety of small corner R inserts
  • Rake angle 30°
Front Turning

Tools for a Very Wide Range of Small Parts Machining

External Turning Tools for front turning, back turning, grooving, threading, and cutting off
Internal Turning Tools for boring, internal grooving and internal threading
Drilling Drills
End Milling End Mills

Tools for front turning, back turning, grooving, threading, and cutting off

Types of Tool Posts Gang type, turret type, cam type
Radial type
Tool Sizes Square holder : .375 - .625 inch (8 - 16 mm)
Round holder : ≤ φ1 inch (φ25.4 mm)

Indexable Inserts Developed Under the Concept of "High Quality, High Efficiency and Long Tool Life."

High Quality E class tolerance, sharp cutting edge, high accuracy small corner R, smooth surface finish
Long Tool Life PVD coating MS6015 / VP15TF / MP9005 / MP9015
High Efficiency Regrinding not necessary due to the employment of indexable inserts. A wide variety of top cutting edge geometries

Tools for Cam Type Automatic Lathes

  • The most suitable for the use with cam type automatic lathes (radial pattern tool posts)
  • The most suitable for machining of small parts with work diameter 5mm or smaller
  • Single holder for front turning, back turning, grooving,threading and cutting off operations

Internal Turning Tools

MICRO-MINI TWIN Boring Bars

Minimum cutting diameter φ2.2 mm -
Boring / Grooving / Threading

MICRO-MINI TWIN Boring Bars

Round holder

Square holder

MICRO-DEX Boring Bars

Minimum cutting diameter φ5.0 mm –

MICRO-DEX Boring Bars

DIMPLE BAR

Minimum cutting diameter φ .39 inch -

DIMPLE BAR

Drilling Tools

End Milling Tools

Solid Carbide Drill
MVS/MVE

Micro Solid Carbide Center Drills
MSP

Solid Carbide Flat Bottom Drills
MFE
Solid Carbide Drills for
Centering and Chamfering
DLE

Solid Gun Drill
Micro Solid Carbide Gun Drill
with through coolant holes
MGS

END MILLING TOOLS

Solid Carbide End Mill
MSTAR End Mill Series

Vibration Control End Mills for
Machining Difficult-to-Cut Materials
SMART MIRACLE End Mill Series