For steels
For stainless steels
For cast iron
For non-ferrous metal
For difficult to cut material
For hardened material
GYDR/L***90*-M20L/R (93.76 KB)
Turning tool holders (straight type) (246.53 KB)
Turning tool holders (45°type) (211.54 KB)
Boring bar holders (230.83 KB)
Boring bar holders Dia.32 body's side lock type sleeve (199.71 KB)
APX3000 arbor type (INCH) (39.62 KB)
APX3000 shank type (INCH) (40.85 KB)
APX3000 arbor type (mm) (79.96 KB)
APX3000 shank type (mm) (109.88 KB)
APX3000 screw-in type (mm) (43.33 KB)
APX3000 long cutting edge type (127.62 KB)
APX4000 arbor type (INCH) (63.87 KB)
APX4000 shank type (INCH) (60.41 KB)
APX4000 long edge-shell endmill type (INCH) (70.48 KB)
APX4000 arbor type (mm) (98.36 KB)
AXD4000 arbor type (INCH) (170.15 KB)
AXD4000 shank type (INCH) (164.17 KB)
AXD4000 arbor type (mm) (183.38 KB)
AXD4000 shank type (mm) (186.68 KB)
AXD4000A arbor type (INCH) (179.11 KB)
AXD4000A arbor type (mm) (213.89 KB)
AXD7000 arbor type (INCH) (93.64 KB)
AXD7000 shank type (INCH) (118.02 KB)
AXD7000 arbor type (mm) (98.25 KB)
Machining for use with side lock holders (27.00 KB)
Hydro-Clamp Type Valve Finisher HVF (146.33 KB)
For steels
For stainless steels
For cast iron
For non-ferrous metal
For difficult to cut material
For hardened material
For finish cutting
For medium cutting
For rough cutting