Notes on Use

Insert Installation

  • Loosen insert screw of holder to install insert.
  • Mesh the insert serration to holder grooves.
  • Fasten the insert screw using the provided wrench while holding rake face of the insert lightly with your thumb. (Figure 1)
  • Check that there is no clearance between the insert bottom and holder flute end. (Figure 2)
Insert Installation

Note On Insert Replacement

  • Clean insert guide grooves by blowing air before installing a new insert.
  • Clean the “slit” underneath the insert on the holder with the provided plate.
  • Use the provided anti-seize lubricant for lubricating the threads of the insert screw.