OPERATIONAL GUIDANCE FOR THE MICRO-MWS DRILLS (Φ.0200"-Φ.1200" & Φ0.50mm-Φ2.95mm)

cautions for use

cautions for use

  • Please use a fine mesh filter (mesh<5 micron) for coolant to prevent jamming in the oil hole.
  • For deep drilling with the long type drill, machining a pilot hole is recommended.
    (Otherwise, centrifugal forces may cause drill breakage.)

Operational Guidance for The MICRO-MWS Drill (Φ.0200"-Φ.1200" & Φ0.50-Φ2.95mm) (L/D>10)

Flat Face Drilling

Drilling a blind hole

Flat Face Drilling

Irregular Face Drilling

Drilling and breaking through on irregular faces or angles

Irregular Face Drilling