For steels
For stainless steels
For cast iron
For non-ferrous metal
For difficult to cut material
For hardened material
Check the item you want to calculate, input values in the two boxes, and then press the Calculate button.
※Divide by 1000 to change to m from mm.
vc (m/min) : Cutting Speed
Dm (mm) : Workpiece Diameter
π (3.14) : Pi
n (min-1) : Main Axis Spindle Speed
What is the cutting speed when main axis spindle speed is 700min-1and external diameter is Φ50 ?
Substitute π=3.14, Dm=50, n=700 into the formula.
vc=(π×Dm×n)÷1000=(3.14×50×700)÷1000
=110(m/min)
Cutting speed is 110m/min.
Check the item you want to calculate, input values in the two boxes, and then press the Calculate button.
f (mm/rev) : Feed per Revolution
I (mm/min) : Cutting Length per Min.
n (min-1) : Main Axis Spindle Speed
What is the feed per revolution when main axis spindle speed is 500min-1 and cutting length per minute is 120mm/min ?
Substitute n=500, I=120 into the formula.
f=l÷n=120÷500=0.24(mm/rev)
The answer is 0.24mm/rev.
Input the values.
Tc(min):Cutting Time
lm(mm):Workpiece Length
l(mm/min):Cutting Length per Min.
What is the cutting time when 100mm workpiece is machined at 1000min-1 with feed = 0.2mm/rev ?
First, calculate the cutting length per min. from the feed and spindle speed.
l=f×n=0.2×1000=200(mm/min)
Substitute the answer above into the formula.
Tc=lm÷l=100÷200=0.5(min)
0.5×60=30(sec)The answer is 30 sec.
Input the values.
h (µm):Finished Surface Roughness
f (mm/rev):Feed per Revolution
RE (mm):Insert Corner Radius
What is the theoretical finished surface roughness when the insert corner radius is 0.8mm and feed is 0.2mm/rev ?
Substitute f=0.2mm/rev, RE=0.8 into the formula.
h=0.22÷(8×0.8)×1000=6.25µm
The theoretical finished surface roughness is 6µm.
Technical consultation from here
24/7Contact formFor steels
For stainless steels
For cast iron
For non-ferrous metal
For difficult to cut material
For hardened material
For finish cutting
For medium cutting
For rough cutting