For steels
For stainless steels
For cast iron
For non-ferrous metal
For difficult to cut material
For hardened material
DC(mm) : Drill Diameter
vc(m/min) : Cutting Speed
fr(mm/rev) : Feed per Revolution
η : Machine Coefficient
Pc(kW) : Actual Cutting Power
How much the Actual Cutting Power is required when cutting SCM440 by MVX3000X2F32? With Cutting Speed is 140m/min, Feed per Revolution is 0.15mm/rev, and Machine Coefficient is 80%.
Select SCM440 from Work Material. Input 30 in DC, 140 in vc, 0.15 in fr, and 0.8 in η.
Then press <Calculate> and Pc=6.5 (kW) is obtained.
Mitsubishi Materials Corporation ("the company") takes great care over the information presented on this webpage, but it does not guarantee its accuracy or appropriateness.
The company does not guarantee the overall consistency of the information and URLs that appear here and reserves the right to modify the contents as needed.
The company accepts no liability for any loss or damage incurred through accessing this webpage or using information obtained from it, regardless of the reason.
Technical consultation from here
24/7Contact formFor steels
For stainless steels
For cast iron
For non-ferrous metal
For difficult to cut material
For hardened material
For finish cutting
For medium cutting
For rough cutting