P21 - Web Catalog | MITSUBISHI MATERIALS CORPORATION

EdpNo.	303159	Order Number	DDJNR3225P11	Grade

B	shank width	25
H	shank height	32
PSIR	tool lead angle	-3
HAND	hand	right hand
SX	shank cross section shape code	2
OAL	overall length	170
WF	functional width	32
HF	functional height	32
CEATC	tool cutting edge angle type code	Both - side and end cutting edge angle
CICT	cutting item count	1
LPR	protruding length	30
BMC	body material code	Steel
LF	functional length	170
LH	head length	30
MTP	clamping type code	clamp on top of insert and into hole
MIID	master insert identification	DNMG110408
DCP	data chip pocket	0
GAMF	rake angle radial	6
GAMP	rake angle axial	-6
THSC	tool holder shape code	offset shank design
TSYC	tool style code	DDJN
KAPR	tool cutting edge angle	93
CUB	connection unit basis	Metric
CSP	coolant supply property	0
FMT	form type	external
SIDE	side	machine side
RE	corner radius	0.8
CNSC	coolant entry style code	without coolant
CXSC	coolant exit style code	no coolant exit

Stock:

:Inventory maintained.

:Non stock, produced to order only.

:Inventory maintained. To be replaced by new products.

:Inventory maintained in Japan.

Tool Material

Ultra Micro Grain Carbide
Ultra micro grain carbide is used as the substrate material

Cubic Boron Nitride
Mitsubishi’s original CBN is used.

Ceramic
Ceramic is used as the substrate material.

High Hardness Powder Metallurgy HSS
High hardness powder metallurgy HSS is used as the substrate material.

Ultra Micro Grain HSS
Cobalt high speed steel is used as the substrate material.

High Speed Steel
High speed steel is used as the substrate material.

Tolerances

Outside Diameter Tolerance
Indicates diameter tolerance of end mill.

R Tolerance Ball
Indicates the radial tolerance of a ball nose end mill.

R Tolerance Radius
Indicates the radial tolerance of an end mill with a corner radius.

Tolerance of Taper Angle
Indicates the tolerance of the taper angle of taper end mill.

Tolerance of Point Angle
Indicates the tolerance of the point angle of end mill.

Shank Diameter Tolerance
Indicates the shank diameter tolerance of end mill.

Angle, Coolant hole, Sharp corner edge and Gash land

Helix Angle
Indicates the helix angle of the end mill.

End Cutting Edge with Coolant Hole

Peripheral Cutting Edge with Coolant Hole

Sharp Corner Edge
Indicates the end mill has a sharp corner edge.

Gash Land
Indicates the end mill cutting edge has a gash land.

Coating

SMART MIRACLE Coating
(Al, Cr)N coaitng optimum for difficult-to-cut materials.

SMART MIRACLE VQT Coating
(Al, Cr)N coating optimum for Ti-alloys.

SMART MIRACLE VQN Coating
(Al, Ti, Si)N coating optimum for Ni-based alloys.

IMPACT MIRACLE REVOLUTION Coating
A coating which adds the excellent high oxidation temperature of (AL, Cr, Si) N-based films to the nano crystal technology of VF.