For steels
For stainless steels
For cast iron
For non-ferrous metal
For difficult to cut material
For hardened material
Under the same machining conditions as conventional breakers, but with the feed rate increased, the surface finish of the workpiece can be improved.
High feed rates not only shorten machining times but also make it possible to combine roughing and finishing operations.
When a change to high feed conditions, the time required to cut one component is decreased, thus more parts can be machined with each insert. In addition, the high feed rate prevents rubbing, therefore, delaying the progression of wear and increasing the tool life of the insert.
Under high feed conditions, the chips generated become thicker and are more easily broken, thus, chip control is improved.
Preventing the cutting edge from vibration during boring and turning of small diameter workpieces as well as providing excellent finish surface roughness.
A standard holders can be used.
(*A double clamp, high rigidity tool is recommended.)
Use a holder with end cutting angle 93° for improving wiper
efficiency. A holder with end cutting angle 91° can improve wiper efficiency, however, there is no wiper efficiency with other end cutting angles (60°, 90°,107°etc.).
Technical consultation from here
24/7Contact formNecessary cookies are used to help this website function properly.
For example, they provide login retention functionality.
Analytical cookies collect information about your use of this website in an anonymous and aggregated form. These cookies are used to analyze and improve the functionality of this website.
These cookies enable this website to provide enhanced functionality and personalisation. They may be set by us or by third party providers.
Functional cookies are used by social networking services to track the use of their built-in features. For example, these cookies allow you to share pages from this website with your social network.
Advertising cookies may be set through this website by our advertising partners based on the data obtained. They identify your unique browser and Internet device and may be used to provide anonymized demographic data, build profiles of your interests, and display advertising relevant to those interests.
For steels
For stainless steels
For cast iron
For non-ferrous metal
For difficult to cut material
For hardened material
For finish cutting
For medium cutting
For rough cutting